Laminated glass is also known as safety glass. As the name suggests, laminated glass is composed of multiple layers of glass. Except for the glass, the interlayer in the middle of the glass. Usually there are three kinds of interlayers: EVA, PVB, SGP.

Have you ever been in a bathroom, dressing room or another private area with a mirror and had that feeling that someone is watching you? You can check to see if a mirror is transparent by observing how it is installed and using a few simple techniques to determine if there's a wall behind it. You may have heard about the fingernail test but there are more accurate ways to tell if a mirror is two-way or not.

What is 13.52mm laminated tempered glass balcony railing? 13.52mm clear laminated tempered glass balcony railing consists of two 6mm clear tempered glass panels together with 1.52mm PVB interlayer.

HS glass – which heats the glass to a uniform temperature of approximately 650º C to 700 º C in an electrically heated horizontal furnace. Ceramic rolls convey the glass through these furnaces at speeds regulated to ensure temperature uniformity and minimal optical distortions. The heat strengthened process parallels the traditional process of glass tempering, except that the cooling cycle is less rapid. However, the heating temperature remains the same for both processes. The residual stress on the edge and the glass surface differ in both cases with tempered glass having a higher level of stress. Due to the relatively low rate of cooling during the strengthening process, heat strengthened glass develops less stress as compared to fully tempered glass. The process increases the mechanical and thermal strength of heat strengthened glass, making it twice as tough as annealed glass.

In recent decades, the advent of laminated glass and the improvement of lamination technology have greatly expanded the usage and application scope of glass in architecture. Laminated glass consists of two or more layers of glass bonded together by an interlayer film with strong adhesive properties, forming a composite unit that shares the load. This not only enhances the load-bearing capacity of the laminated glass before it fractures but also provides a certain level of post-fracture load-bearing capacity.

Glass self-explosion,you shall know who is the responsible? How to avoid toughened glass self-explosion? How to identify whether tempered glass is self-explosion?